This model is universal Controller Z.VST.3463.A1 gives the opportunity to build on the base of the laptop or monitor matrix full multimedia TV c T-2 tuner on board without depriving themselves of the opportunity of using it as a monitor.
Controller Z.VST.3463.A1 has on board analog-to-digital Touraine Rafael R842 with support for T-2, DVB-T, DVB-C, ATV, by just saying support for more digital signal cable, teletext and radio TV. As main chip has allowed not only to exploit the full potential of the TV chip, but not deprived of the possibility of reproducing a photo, video, audio files from a USB drive. All the innovations introduced in this model is made possible by the use of a more powerful master chip from the company Mstar MDS3463GU-Z1
Suitable for Europe, Africa, The five Central Asian countries, the Middle East, Russia, Thailand, Myanmar, Kenya, Portugal, Malta, Uganda and other countries or regions.
Support Digital Signal and Russian
Controller chip: MDS3463GU-Z1
TV tuner chip: Rafael R840
flash memory: 25Q64CSIG
Power Input: DC 12V 4A
Chip Audio: CS37AD2AB
Audio output power: 2x8W
Consumption: operating mode -> = 6W
simple - <0.3W
Video input: TV: DVB-T / T2, DVB-C, ANALOG TV (ATV)
YPbPr IN or AV OUT
Additional inputs outputs: audio mini jack 3.5mm USB
Z.VST.3463.A’ s USB slot can be used for updating software and playing multimedia, such as Movie MP3 and JPEG.
You can also set a boot logo or Mirror Display.
How to know if your panel suitable for this board?
Step 1: Find your LCD model's resolution (you can check the resolution from this link: http://www.panelook.com/index.php)
Step 2: Leave a message when you order ,so we can send the firmware to you.
Step of USB upgrade :
1.Put the firmware of "3463GU_A.bin" in formatted USB flash disk ,then insert the USB disk and the 7KEY-Button to the board
2.After turn on the power ,the light of the 7key button will be Red then flash red and blue.after about 1 minute, the light stop flashing ,it means upgrade has finished.(Note that write programs do not power outages, crashing won't be able to use)
How to into Factory setting?
Press"Input" button then press"2 5 8 0"
1 x Z.VST.3463.A1 Control board
1 x Remote Control (English Keypad)
1 x 7-Key Switch
1 x IR
1 x 2ch 8-bit 30pins LVDS cable
1 x 4 lamp 2 pins CCFL inverter
If you need 12v 4A power supply, Click here to buy
If you need Speaker , Click here to buy
If you need Baffle Stand, Click here to buy
If you need else 7key button, Click here to buy
If you don't know your panel works with this kit or not , Just feel free to contact us if you are confused.
Pls check the Basic use video in this link first if you don't know how to use.
Playing Video via USB port